Build SMARTER, build faster.

CAMO products are easy to use, easy to learn, and usable on any deck—so you can get the job done and move on.

When you buy a tool from CAMO, you can rest assured that it will get the job done and hold up. For further peace of mind, the CAMO DRIVE and MARKSMAN Pro tools are backed by a comprehensive CAMO warranty.

MARKSMAN Pro®-X1 Tool

Use with camo edge deck screws only

  • For use when installing treated lumber

  • Fastener-free surface: installs two patented CAMO Edge Deck Screws through the edge of the board

  • Exclusively use with CAMO Edge deck screws that auger material out to reduce splitting and cracking

  • Fits any 5-1/4 in. (133mm) to 5-3/4 in. (146mm) deck board and creates automatic 1/16 in. (1.58mm) spacing

MARKSMAN Edge Tool

Use with camo edge deck screws only

  • For use when installing treated lumber, cedar, and softwood. Can be used with other deck board products with secondary spacers.

  • Single-shot, no gap tool installs a CAMO Edge Deck Screw through the edge of the board

  • Exclusively use with CAMO Edge deck screws that auger material out to reduce splitting and cracking

MARKSMAN Pro® Tool

Use with camo edge deck screws only

  • For use when installing composite and PVC decking, but can also be used on hardwood and cedar

  • Fastener-free surface: installs two patented CAMO Edge Deck Screws through the edge of the board

  • Exclusively use with CAMO Edge deck screws that auger material out to reduce splitting and cracking

  • Fits any 5-1/4 in. (133mm) to 5-3/4 in. (146mm) deck board and creates automatic 3/16 in. (5mm) spacing

  • Installation instructions

MARKSMAN Pro®-NB

Use with camo edge deck screws only

  • For use when installing any narrow board—treated lumber, cedar, hardwood, composite, and PVC

  • Fastener-free surface: installs two patented CAMO Edge Deck Screws through the edge of the board

  • Exclusively use with CAMO Edge deck screws that auger material out to reduce splitting and cracking

  • Fits any 3-1/4 in. (83mm) to 5 in. (127mm) deck board and creates automatic 3/16 in. (5mm) spacing

Edge Deck Screws

Deck and Trim Screws

  • Deck screws for pressure treated lumber, cedar, redwood, hardwood, composite, capped composite, and PVC decking

  • Edge deck screws fasten through the edge of the board for a fastener-free surface and are for exclusive use with CAMO PRO GUIDE

  • Reverse rake tip augers material out reducing splitting and cracking, reverse upper thread draws board tight

  • Trimhead reduces the visibility of the screw

  • 1-⅞ in. (47.6mm) screws for boards 3/4–1 in. (19–25.4mm) thick and 2-⅜ in. (60.3mm) screws for boards 1–1-½ in. (25.4–38.1mm) thick

  • T-15 Star Drive, driver bit is included

  • Available in PROTECH and 316 Stainless Steel

  • 350, 700, 1750 count